The BAD_POOL_CALLER is a very tricky error message which can appear on the windows based system. This error message is typically results from the system memory management problem. The error is delivered through a blue screen as the system is booting up and windows shut down to avoid system corruption. Following shut down the PC may reboot, but will continue the cycle of putting up the BAD_POOL_CALLER blue screen and shutting down again and again.
Causes of the BAD_POOL_CALLER error on the windows?
Error BAD_POOL_CALLER can typically come into view during upgrading of the OS or after a new driver has been installed in the system. The BAD_POOL_CALLER is also show as “stop: 0x000000c2” and same types happens because there are trouble in memory management on your computer. In most way, the BAD_POOL_CALLER error occur when new personal computer software or hardware has been installed or following any updates. The cause may be a malfunctioning software or hardware, disconnected devices, or it might be registry setting or values and your systems incompatibility with the installed products. This error may cause by the following reasons:
- This may be displays during the up gradation of operating system or after you have added some new hardware in your system.
- Error message BAD_POOL_CALLER are also be occur because of installation of some software programs or after updating system. This error can also shows something such as “stop: 0x000000c2” on the system screen.
- The error message may appear on your system screen due to defective memory chip.
- If driver is incompatible with hardware of the system or there is some difficulty in management of memory, then can also your system may show this error.
- An unacceptable pool request has been made by the present thread.
Easy ways to solve windows error message BAD_POOL_CALLER
If you want to fix windows error message BAD_POOL_CALLER from your system then you can use following steps to easily solve this error:
You should perform a System Restore to repair error BAD_POOL_CALLER, by these processes:
- Turn on your system and log-on as administrator.
- Click on the Start menu of the system and then choose “All Programs” -> “Accessories” -> “System”
- And then select “System Restore.”
- A new windows will appear, choose “Restore my personal computer to an earlier period. And then click on “Next.”
- Choose the most recent restore date listed from the “Select a Restore Point” list. And click on “Next.”
- After that choose “Next” again in the window for confirmation
- Reboot your system when restoration is finished.
If you are not satisfied with above processes then you can also use third party repair tool to easily remove this error message from your system without any difficulty.