Buffer alignment error code 10
Buffer alignment error occurs when a buffer data alignment is fixed by the function driver for the ADMA2 which is not match for the SD card. Due to this reasons the driver’s fails and show error code 10 in the device manager. When a user working with the PC may face many different types of issue and this is also one of the driver errors occurs when the internal issue found in System driver. In this article we will discuss about the buffer alignment error and how to fix buffer alignment error code 10.
Symptoms of the buffer alignment error 10
Basically if the System is not proper maintain by the user it may lead seriously malfunction of the PC. Many problem will be avoid by the proper maintain of the System.
When a user use DMA 2 host controller to implement for the secure digital card bus driver on a System which is run by the Windows 2007 or Windows server 2008 R2 may face the below given error message on the Device manager
A yellow exclamation mark on the controller
Error code 10
Cause of the Buffer alignment error code 10
As the above discussion we know that if the driver has any issue found it can’t allow to the Operating System to work properly because System driver is the main components of the Operating System which is mainly use to run the hardware and software inside the PC. If the alignment of data buffer which is provided by the function driver for ADMA2, if it is not match with the SD card bus the System drivers fails to start and unable to perform the operation so the device manager returns error code 10 message to the user. So it is most necessary to know the solution of buffer alignment error when use host controller in Windows 7 or in Windows Server 2008 R2.
Solution of buffer alignment error when use host controller in Windows 7 or in Windows Server 2008 R2
To avoid the driver issue you have to repair your System driver and to get solution from the buffer alignment error 10 by manually you can use hot fix. The Microsoft Windows has a hot fix service to get resolve from buffer alignment error 10 immediately form the PC. You have to download this hot fix from Microsoft Windows site. To apply this service you have to run one of the below given operating Systems.
Windows 2007, Windows server 2008 R2 and Windows 2007 service pack1.